新疆‘晚丰’巴旦木花粉萌发培养基组分的筛选

为提高人工授粉中巴旦木的产量,本研究采用花粉离体培养法,筛选新疆‘晚丰’巴旦木品种花粉萌发中不同培养基组分的配方施用量,研究不同培养基配方组分对花粉萌发的影响。实验中在培养基内添加尿素、硼酸、氯化钙、吲哚乙酸、赤霉素和蔗糖,均能促进花粉萌发和花粉管生长,在一定范围内,花粉萌发率和花粉管长度均随培养基配方组份量的增加而增加,但超过一定添加量时,促进作用逐渐减弱并出现抑制作用。研究结果显示:添加0.1%尿素、0.01%硼酸、0.005%氯化钙、0.0001%吲哚乙酸、0.0015%赤霉素和10%蔗糖时,新疆‘晚丰’巴旦木品种花粉萌发率最高,花粉管长度也达到最大值。本研究结果为实践生产中人工授粉和相关研究提供参考和理论依据,也为进一步顺利进行亲和授粉研究提供前期理论基础。     

食用菌合作社成员参与品牌建设意向的影响因素

推动食用菌农业合作社品牌建设是提升合作社发展水平的重要途径,能够极大促进食用菌合作社资源的高效利用,推动乡村产业振兴的步伐,进而有效加快我国食用菌产业的国际化进程。为进一步引导农业合作社成员积极参与品牌建设,对合作社成员参与品牌建设意向的影响因素进行了探究。结果表明,以下三个方面是食用菌合作社成员对参与标准化生产意向的影响程度最为强烈;影响因素还有以下3个方面:一是对于食用菌销售收益的满意程度;二是借助合作社销售食用菌的占比;三是食用菌合作社决策的民主性。     

结构创新的楼房猪场是防非保供的一种可行模式

传统的养猪模式难以应对诸如非洲猪瘟这样的疫病,普通平层猪场叠加而成的楼房没有从本质上得到改进,而结构创新之后的楼房猪场在养猪的可靠性上大大增强,并可能发展为城市养猪新模式,为防非保猪、稳产保供提供一种解决方案。在此基础上升级的"料、养、宰、商一体化"造肉工厂模式,更是一种能把运猪变为运肉的可行解决方案。当这些模式得到应用和推广时,困扰行业的"猪周期"问题也将得到妥善解决。     

农业科研院所科技援疆的调查与思考——以山西省农业科学院为例

本文以山西省农业科学院为例,分析了农业科研院所科技援疆的历程与特征,总结了科技援疆典型做法,并深入剖析了科技援疆存在的问题,提出了强化援疆目标、精准援疆项目、筑牢援疆保障、拓展援疆领域、完善运作机制、增加援疆资金、加强项目管理等进一步强化科技援疆工作的建议。     

含水率对安溪县花岗岩崩岗土体胀缩特性的影响

崩壁土壤水分变化是导致崩岗发生和发展的主要因素之一。降雨可以导致崩岗崩壁失稳发生崩塌,降雨过程中土体在不同含水率下的胀缩特性是决定崩壁失稳的关键因素之一。本研究以安溪县典型崩岗崩壁土体为对象,通过室内无荷膨胀率和线性收缩率试验,研究不同梯度含水率对崩壁不同土层胀缩特性的影响。结果表明:不同土层的无荷膨胀率均随初始含水率增大而减小,线性收缩率则相反。初始含水率与崩壁不同层次土壤无荷膨胀率之间存在着明显的指数递减关系,各土层拟合所得到的回归方程均可表达为:δ_e=ae~((–ω/b))+c,R~20.96;初始含水率与崩壁不同层次土壤线性收缩率之间则存在着明显的指数递增关系,各土层拟合所得到的回归方程均可表达为:δ_(sl)=ae~((ω/b))+c,R~20.96。对于同一土层,膨胀的变化幅度大于收缩的变化幅度。比较不同土层的膨胀和收缩变化幅度发现,红土层变化幅度最大,分别较砂土层高2.58%和3.33%,较碎屑层高3.61%和4.67%。这种不可逆的干湿胀缩现象可能是造成土体产生裂隙进而引起崩壁坍塌的原因,这对于认识崩壁失稳崩塌原因和崩岗发生机理具有重要意义。     

基于Netty的农业物联网服务器系统设计

为了方便对温室环境的监控和控制,使用Netty网络框架设计了一个农业物联网服务器系统,能够简化物联网服务器端的开发,实现下位机与上位机的实时通信。本文阐述了该系统的工作原理和总体设计,以期为实现大棚农作物生长的智能化和信息化管理。     

Temporal disease dynamics and relative importance of sexual and asexual reproduction of grape downy mildew (Plasmopara viticola) in an isolated vineyard in the North Georgia Mountains,USA

The North Georgia Mountains are the southernmost region along the United States East Coast where European wine grapes (Vitis vinifera) are grown commercially. Epidemics of downy mildew, caused by Plasmopara viticola, are frequent and severe, but little is known about the epidemiology and population biology of the pathogen in this region. Disease monitoring in an experimental vineyard from 2015 to 2017 indicated that times of disease onset and progress rates were highly variable across years and cultivars. Oospores were observed microscopically, and simulation with a process-based model indicated presence of conditions favourable for oospore germination in the spring and early summer each year. A total of 409 P. viticola isolates collected over three  years were genotyped with seven microsatellite markers, revealing very high genotypic diversity, which when combined with the observation of oospores is indicative of a sexually reproducing population. Among the 409 isolates, 225 multilocus genotypes (MLGs) were identified, of which 164 were detected only once and 61 were repeated (clonal). Eight MLGs (represented by 28 isolates) were detected across years, suggesting the possibility of asexual overwintering of P. viticola in this region. Across sampling dates, the percentage of isolates belonging to nonrepeated (unique) MLGs ranged from 27.3% to 63.2%. Even towards the end of the annual epidemic, the percentage of isolates in nonrepeated MLGs was still relatively high, around 30%. These MLGs may have originated from oospores germinating late during the growing season, although incomplete sampling at earlier dates and contribution by immigration cannot be fully excluded.     

河北省主要树种单木和林分生长率模型研建

利用第六次至第九次全国森林资源清查河北省2001,2006,2011,2016年4个年度的固定样地调查数据,采用非线性回归估计方法,建立了18个树种组的单木胸径生长率和材积生长率模型,以及12个树种组的林分材积生长率模型。结果表明,单木生长率模型的平均预估误差(MPE)基本都在3%以内,而平均百分标准误差(MPSE)、胸径生长率模型大都在10%以内,材积生长率模型大都在20%左右;林分生长率模型的平均预估误差(MPE)基本都在5%以内,平均百分标准误差(MPSE)大都在25%以内。所建模型可为河北省开展森林资源年度更新提供技术支撑。     

Threats to at-risk salmonids of the Canadian Rocky Mountain region

Trout and charr, members of the salmonid family, have high conservation value but are also susceptible to anthropogenic threats in part due to the specificity of their habitat requirements. Understanding historical and future threats facing these species is necessary to promote their recovery. Of freshwater trout and charr in the Canadian Rocky Mountain region, westslope cutthroat trout (Oncorhynchus clarkii lewisi), bull trout (Salvelinus confluentus; a charr species) and Athabasca rainbow trout (Oncorhynchus mykiss) are of conservation concern. And indeed, range contractions and declining populations are evident throughout much of their ranges. Range contraction was most evident in the southern Alberta designatable unit (DU) of westslope cutthroat trout. Diminished populations were also evident in the downstream watersheds of the Alberta bull trout range, and throughout the Athabasca rainbow trout range. We assessed historical and future threats to evaluate the relative importance of individual threats to each DU and compare their impact among species. Individual threats fall into the broad categories of angling, non-native species and genes, habitat loss and alteration, and climate change. Severity of each threat varies by DU and reflects the interaction between species’ biology and the location of the DU. Severity of threats facing each DU has changed over time, reflecting extirpation of native populations, changes in management and industry best practices, expansion of non-native species and progressing climate change. The overall threat impact for each DU indicates a high probability of substantial and continuing declines and calls for immediate action.     

Implementation of an easily reconfigurable dynamic simulator for recirculating aquaculture systems

Methodology of Programmable Process Structures has been implemented and applied for the flexible automatic generation and simulation of Recirculating Aquaculture Systems. First, we implemented and validated the model for a pilot unit, based on short time experiments with Common carp (Cyprinus carpio), utilizing data and functionalities from the literature. Afterwards, starting from this model we generated a hypothetical single tank model of simulated increasing volume, to demonstrate how it supports the simplified, preliminary analysis, design and control of the possible multi-stage systems. We showed that the simulation of a single tank with an appropriately increasing volume makes possible to study the various control strategies, as well as to design the structure and the grading strategy of the multi-stage systems, without an increased combinatorial complexity. In the knowledge of the simulated increasing volume, we determined the volumes of subsequent stages by equidistant partitioning of the rearing time, algorithmically. Considering the available (or planned) tank volumes, this method makes possible to design a multi-stage system that approximately corresponds to the previously optimized single tank model. This conclusion was illustrated by the generation and simulation of the model for the respective multi-stage system.